Panamax Max 5300 Power Management, 2RU, 11 Outlets - M5300-PM

Category : Power Conditioners
SKU : M5300-PM


Panamax M5300-PM

Improves Picture and Sound Quality, Monitors Incoming Line Voltage, and Reduces Cross-Contamination Between Components.

Improves Picture and Sound Quality

Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax™ patent pending AVM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5300-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

Panamax M5300-PM Features at a Glance

Clean Power Level 4

Improves picture and sound quality by eliminating noise across the entire AC bandwidth. 40% more efficient at eliminating noise than Clean Power Level 3.

AVM (Automatic Voltage Monitoring)

Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.

High Current Outlets

2 outlets for equipment with high power demands (Amps/Subwoofers).

USB Charger

Convenience charger for mp3 players, cell phones, and other small electronics.

Gaming LAN Port

Easy access to LAN port on front panel. Perfect for online gaming.

5 Isolated Outlet Banks

Isolating outlet banks from one another prevents noise contamination between components.

12 Volt Trigger

Allows source equipment to activate or deactivate the switched outlets on the M5300-PM.

Power Sequencing

Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.

11 Outlets

5 Always On, 4 Switched, 2 Switched High Current.

FamilyPM Series
Line Voltage120 (Volts)
BlueBOLT EnabledNo
Power Factor TechnologyNo
Number of Outlets11
Number of Isolated Banks5
Outlet Descriptions1 (always on, linearly filtered outlet, front panel) 4 (always on, linearly filtered outlets, rear panel) 4 (switchable, linearly filtered outlets, rear panel) 2 (switchable high current outlets, rear panel)
Rack MountableYes
Rack Ears IncludedYes
Front Panel Meter(s)1 voltmeter, 1 Ammeter
Front Media Light(s)No
ControlOn/Off control of switched outlets through front panel power button or rear panel DC trigger.
Voltage RegulationNo
USB Charging1 front panel USB charger
Low Voltage Trigger12 V, In/Out
AC Power Cord10 ft. detachable
Dimensions17" W x 12.75" D x 3.5" H, (4.1" Including feet)
Weight12.8 lbs
AC Protection
AC Protection TechnologyProtect or DisconnectAutomatic Voltage MonitoringL-N, L-G, N-G Protection ModesThermal Fusing
Automatic Voltage ShutoffYes
Under-Voltage Shutoff90 VAC ± 2 VAC
Over-Voltage Shutoff142 VAC ± 8 VAC
Maximum Current Rating15 (Amps)
Initial Clamping Level200V Peak
Filtration TechnologyLiFT
Filtration RatingBank 1: Up to -86 db (100 KHz _ 2 MHz) Bank 2: Up to -91 db (100 KHz _ 2 MHz) Bank 3: Up to -81 db (100 KHz _ 2 MHz) Bank 4: Up to -100 db (100 KHz _ 2 MHz) Bank 5, High Current Outlets: Up to -81 db (100 KHz _ 2 MHz)
Signal Line Protection
Signal Line Protection2 LAN, 1 Tel, 3 Cable/Satellite
Shipping Info
Length20.3 (Inches)
Width10.3 (Inches)
Height24 (Inches)
Weight19.55 (Lbs)
Unit of MeasureEach
Master Pack Qty1
Other Specifications
Voltage Protection Rating (UL 1449 3rd Edition, 3,000A)500V
Single Pulse Energy Dissipation2125 Joules
Peak Impulse Current72,000 Amps
LAN - Wires Protected8-Wires
LAN - Compatibility10/100bT
LAN - Clamping Level60V ± 5V
Coax - ShieldedYes
Coax - Insertion Loss< 0.5 dB
Coax - HD 1080 i/p ReadyYes
Coax - Frequency Range0 MHz - 2.2 GHz
Coax - ConnectionsFemale
Coax - Clamping Level75V
Coax - BidirectionalYes

Write a review