Furman 20A Advanced Power Conditioner W/SMP, No Lights, 9 Outlets, 1RU, 10Ft Cord-P-8-Pro C
You may also like
Furman P-8 PRO C
The P-8 PRO C features Furman’s venerable Series Multi-Stage Protection (SMP) circuit as well as our exclusive Linear Filtering Technology (LiFT). Together, these technologies comprise what is, without question, the worlds most advanced and comprehensive transient voltage surge suppressor / conditioner.
The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Furman P-8 PRO C Features at a Glance
- SMP+ with extreme voltage shutdown
- LiFT (Linear Filtering Technology) with zero ground contamination
- Eight rear panel outlets and one front panel outlet
- BNC connector on the rear panel allows you to attach any standard (12V 0.5 Amp) goose-neck lamp to illuminate the rear of your rack
- 2400 Watt rating, with a high in-rush 20 Amp circuit breaker
- Rugged road-worthy steel chassis
- 10 foot power cord with NEMA 5-20P plug
|Power Factor Technology
|Number of Outlets
|Number of Isolated Banks
|All 9 outlets linearly filtered and surge protected
|Rack Ears Included
|Front Panel Meter(s)
|Front Media Light(s)
|Front panel On/Off switch
|CSA UL1449, CE, NRTL-C
|Low Voltage Trigger
|AC Power Cord
|10 foot power cord with NEMA 5-20P plug
|19" W x 10.5" D x 1.75" H
|AC Protection Technology
|Extreme Voltage Shutdown Series Multi-Stage Protection Non-sacrificial protection with zero ground contamination
|Automatic Voltage Shutoff
|Maximum Current Rating
|Initial Clamping Level
|188 VAC peak @ 3,000 Amps
|10 dB @ 10 kHz 40 dB @ 100 kHz 100 dB @ 10 MHz
|Signal Line Protection
|Signal Line Protection
|Unit of Measure
|Master Pack Qty
|BNC Socket w/Switch:
|Rear rack lamp, 12VAC 500MA max (lamp not included)
|Maximum Surge Current: