Furman 15A Prestige Power Conditioner w/ Power Factor Technology -P-1800 PFR

Category : Power Conditioners
SKU : P-1800 PFR


Furman P-1800 PFR

Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF R offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics.

Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies.

Power Factor Technology

Your amp needs a lot of power to sound its best. If you're plugging into the wall, there's a good chance your amp is not going to get the current it needs when pushed. Furman's exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman's Power Factor Technology keeps your instrument amplifier's tone consistent and sounding it's best.

Clear Tone Technology

Clear Tone Technology works in unison with Power Factor Technology and Linear Filtering Technology to add an additional layer of AC noise filtration specifically engineered for instrument amplifiers. Clear Tone Technology provides tuned circuits that unveil instrument tone, harmonics, and clarity, resulting in a fuller sound and improved dynamic response.

Furman P-1800 PFR Features at a Glance

  • Power Factor Technology
    • Power Factor Technology supplies 45 amps of instantaneous reserve current, on demand, for power starved amplifiers.
  • Surge Protection
    • Furman's exclusive SMP technology provides the highest level of surge amp spike protection available.
  • Noise Filtration
    • LiFT offers AC power filtering to ensure clean power for unequaled audio amp video clarity.
  • Voltage Protection
    • Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
  • Diagnostic Lights
    • LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
  • Isolated Banks
    • Isolated outlet banks minimize inter-component interference and noise contamination.
  • Clear Tone Technology
    • Clear Tone Technology provides tuned filtering circuits engineered for instrument amplifiers to provide a clean and consistent tone.
  • Voltmeter
    • Large digital voltmeter with discrete dimmer button displays incoming line voltage.
  • Wall Wart Spacing
    • Three widely spaced outlets accommodate bulky AC power transformers.
  • 15 AMP Rating
    • 15 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
  • Nine Total Outlets
    • Nine total outlets (8 rear panel outlets and one front panel convenience outlet).
  • BNC Lamp Connector
    • Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.
  • USB Charger
    • Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.
FamilyPrestige Series
Line Voltage120 (Volts)
BlueBOLT EnabledNo
Power Factor TechnologyYes
Number of Outlets9
Number of Isolated Banks3
Outlet DescriptionsAll 9 outlets linearly filtered and surge protected. 2 rear panel outlets are high current outlets.
Rack MountableYes
Rack Ears IncludedYes
Front Panel Meter(s)LED voltmeter displays incoming line voltage
Front Media Light(s)No
ControlFront panel: - On/Off switch - Voltage meter dimmer button
Voltage RegulationNo
USB Charging1 front panel USB charger
Low Voltage TriggerN/A
AC Power Cord10 ft. captive 3/14 AWG, black cord with NEMA 15 plug
Dimensions19" W x 10.5" D x 1.75" H
Weight13 lbs
Power Consumption8 Watts
AC Protection
AC Protection TechnologyExtreme Voltage ShutdownSeries Multi-Stage ProtectionNon-sacrificial protection with zero ground contamination
Automatic Voltage ShutoffYes
Under-Voltage Shutoff90V
Over-Voltage Shutoff140 VAC
Maximum Current Rating15 (Amps)
Initial Clamping Level188 VAC peak @ 3,000 Amps
Filtration TechnologyLiFT, Clear Tone Technology
Filtration Rating30 dB @ 2kHz40 dB @ 10kHz50 dB @ 20kHz70 DB @ 100KHZ
Signal Line Protection
Signal Line ProtectionNo
Shipping Info
Length21.9 (Inches)
Width14.8 (Inches)
Height4.1 (Inches)
Weight14.5 (Lbs)
Unit of MeasureEach
Master Pack Qty2
Other Specifications
BNC socket with switch for rear rack lamp:12VAC 500mA max (lamp not included)
Response time:1 nanosecond
Maximum surge current:6,500 Amps
Reactive power:460 VA

Write a review